STEMMA Wired Potentiometer Breakout
Board - 10K ohm Linear
For the easiest way possible to measure
twists, turn to this STEMMA potentiometer
breakout (ha!). This plug-n-play pot comes
with a JST-PH 2mm connector and a
matching
https://www.adafruit.com/product/4493
Adafruit MCP9808 High Accuracy I2C
Temperature Sensor Breakout
The MCP9808 digital temperature sensor
is one of the more accurate/precise we've
ever seen, with a typical accuracy of
±0.25°C over the sensor's -40°C to...
https://www.adafruit.com/product/5027
Adafruit Mono 2.5W Class D Audio
Amplifier - PAM8302
This super small mono amplifier is
surprisingly powerful - able to deliver up
to 2.5 Watts into 4-8 ohm impedance
speakers. Inside the miniature chip is a
class D controller, able to...
https://www.adafruit.com/product/2130
Mono Enclosed Speaker with Plain Wires -
3W 4 Ohm
Listen up! This single 2.8" x 1.2"
speaker is the perfect addition to any
audio project where you need 4 ohm
impedance and 3W or less of power. We...
https://www.adafruit.com/product/4445
©Adafruit Industries
Page 125 of 263
Need help?
Do you have a question about the ESP32-S3 and is the answer not in the manual?