HIGH/LOW PITCH ( HI/LO-PIT ):
GOAL of EXAMPLE:
1 condition.
Where next?
Adjustability:
• The conditions are activated in the CONDITION SELECT function (p.78).
• Both adjustments may be set to MANUAL , temporarily turning off the knob.
• Adjustments may be memorized. Then, the knobs can be returned to the center
point to use that amount of adjustment. Allows easy use of the trimming knobs
for multiple models.
STEPS:
Open the HI/LO-PIT function.
A function is turned on.
Set the rate. (Ex: 80% )
Close.
PIT-CURVE : see p. 81.
HOV-PIT : see p. 85.
86
INPUTS:
for 1 second.
to HI/LO-PIT .
to ADJ .
to NORM .
to IDL1 .
for 1 second to IDL1 .
or
to HI-PIT .
to 80% .
to +DT5 or -DT5 .
t o d e s i r e d k n o b o r t r i m a n d
direction.