Table of Contents
Advertisement
GOAL of EXAMPLE:
Activate SNAP-ROLL . Adjust aileron to
105% ,elevator travel to 95% , rudder
travel to 120% in the right/up snap.
Activate SAFE-MODE so snaps cannot be
performed when gear is down.
Adjust rudder travel in the left/down
snap to 105% .
Where next?
STEPS:
Open the SNAP-ROLL function.
Activate the function.
Adjust the travels as needed. (Ex:
aileron to 105% , elevator to 95% , rudder
to 120% .)
Optional: Activate SAFE-MODE
when SWITCH E
deactivated when that switch is in the
-100%
down snap and adjust rudder to 105%
Close menu.
Set up programmable mixes: see p. 65.
INPUTS:
for 1 second.
to SNAP-ROLL .
to MIX .
to AIL .
to ELE .
to RUD .
E or G up.
G
to CH- .
snap switch.
Notice MIX reading is still OFF .
E or G down.
Notice MIX reading changes to ON .
to SW1 .
to SW2 .
SwA down SwB down.
Repeat steps above to set percentages.
57
to OFF or ON .
to 105% .
to 95% .
to 120% .
to SAFE-MODE
to SwA .
to SwB .
Advertisement
Table of Contents
