Table of Contents
Advertisement
RECEIVER: R2008SB
•The R2008SB has an S.BUS system output port and a conventional system channel outputs. It can also be
used with conventional system servos, etc. in addition to S.BUS system compatible servos and gyros, etc.
LED
Link switch
Antenna
•This receiver recognizes S-FHSS and FHSS automatically. However, in FHSS, it is operation from 1CH to
4CH. Moreover, in FHSS, F/S also serves as only 2CH. Choose S-FHSS mode, if R2008SB and T8J are
used.
SERVOS
•The included receiver is compatible with all J-plug Futaba servos, including retract, winch, and digital
servos.
Your 8J system includes the following components:
• T8J Transmitter
• R2008SB Receiver
• Switch harness
• Aileron extension cord
• Neck strap
* The set contents depend on the type of set.
Transmitter T8J
(2-stick, 8-channel, S-FHSS system, Built-in
Dual Antenna Diversity)
Transmitting frequency: 2.4GHz band
Power supply: 4-AA 1.2V Dry Cell batteries; 4.8V
total (sold separately)
or HT5F1700B Ni-MH battery (option)
or FT2F2100B Li-Fe battery (option)
R2008SB
CONTENTS AND TECHNICAL SPECIFICATIONS
(Connectors)
Channel 1
Channel 7
for conventional
system
S.BUS Port
Channel 8 output
for conventional
system
/Battery terminal
Receiver R2008SB
(Dual Antenna Diversity)
Power requirement: 4.8V to 7.4V battery or regulated
output from ESC, etc.
Size: 0.98 x 1.69 x 0.55 in. (24.9 x 42.8 x 14.0 mm)
Weight: 0.34 oz. (9.5g)
(*1)
Be sure that when using ESC's regulated output
the capacity of the ESC must meet your usage
condition.
8
output
output
(*1)
Advertisement
Table of Contents
