Table of Contents
Advertisement
Spectral PC 1800Z IP65
6.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an outdoor spot. It is not suitable for households and for
general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Spectral PC 1800Z IP65 can be operated with a DMX controller, or without a DMX controller as a
stand-alone device or in a master/slave setup.
The Spectral PC 1800Z IP65 supports the following control modes:
●
Stand-alone:
●
Master/Slave:
●
DMX-512:
For more information about how to connect the devices, refer to 5. Setup on pages 16–18.
To operate the device manually as a stand-alone device or in a master/slave setup:
01) Adjust the intensity values for the colors. See 6.6.1. Static Colors on page 23 for more information.
02) Add strobe effect or adjust the zoom. See 6.6.1. Static Colors on page 23 for more information.
In auto operation mode you can run one of the 10 built-in auto programs or 10 user-editable custom
programs. To run one of the programs:
01) Select one of the 10 auto programs or 10 custom programs. See 6.6.3. Auto Programs on page 24 for
more information.
02) Adjust the speed of the selected auto program. See 6.6.3. Auto Programs on page 24 for more
information.
Note:
●
You cannot adjust the speed of the custom programs.
●
You can upload the custom programs from the master device to the slave devices in master/slave
setup. See 6.6.8. Settings on pages 26–27 for more information.
To operate the device with a DMX controller:
01) Select DMX mode in the Run Mode menu. See 6.6.4. Run Mode on page 24 for more information.
Product code: 43553
Auto operation mode (auto programs, custom programs), manual
operation mode (static colors)
Auto operation mode (auto programs, custom programs), manual
operation mode (static colors)
4 channel modes (9, 9,12 and 17 channels)
19
Advertisement
Table of Contents
