Tolerance Check For Target Quantity - KERN EOC 30K-4S Operating Manual

7.8.2 Tolerance check for target quantity

Settings
Press and
mode.
„net H" will be displayed.
Press repeatedly, until the display for entering the
lower limit value „PCS L" appears.
Press , the current setting will be displayed.
To enter the lower limit, e. g. 75 items, press the
navigation buttons (see chap. 2.2.1); the currently
enabled digit will be flashing.
Confirm input by
Press repeatedly, until the display for entering the
upper limit value „PCS H" appears.
Press , the current setting for the upper limit will be
displayed.
To enter the upper limit, e. g. 100 items, press the
navigation buttons (see chap. 2.2.1); the currently
enabled digit will be flashing.
Confirm input by
32
at the same time in weighing
.
.
EOC-BA-e-1920