Tolerance Check For Target Quantity - KERN CCS 6K-6 Operating Manual

9.2 Tolerance check for target quantity

 Press
, the active tolerance weighing mode is indicated.
 If needed, select tolerance control for target weight (PSt nEt) with
or
 Press the TARE key , which shows the currently set upper threshold.
 To change, input the desired value, e.g. 100 pieces, with the numeric keys.
 Confirm with TARE key; the currently adjusted minimum threshold will be
displayed.
 To change, input the desired value, e.g. 90 pieces, with the numeric keys.
 Confirm with TARE key, the tolerance control will start.
The indicator  above
38
(models CFS 50K-3).
Display example model CFS 6K0.1:
appears.
CFS/CCS-BA-e-1825