Switch Installation; Warnings - Cisco IE 4010 Hardware Installation Manual

Switch Installation

This chapter contains the following sections:
•
•
•
•

Warnings

These warnings are translated into several languages in the Regulatory Compliance and Safety Information
for the Cisco IE 4010 Switch document.
These warning statements apply to all the switches:
Warning
Warning
Warning
Warning
Warnings, on page 15
Installation Guidelines, on page 17
Verifying Switch Operation, on page 17
Installing the Switch, on page 17
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals. Statement 43
Read the installation instructions before you connect the system to its power source. Statement 1004
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
2
C H A P T E R
Cisco IE 4010 Switch Hardware Installation Guide
15