Cisco IE 4010 Hardware Installation Manual page 44

Power-Supply Modules
Figure 19: PWR-RGD-AC-DC-H Power-Supply Module
1
2
3
Figure 20: PWR-RGD-LOW-DC-H Power-Supply Module
1
2
3
Note Power Supplies with the -H suffix are required for hazardous environment installations. Non hazardous
environments may use either -H or non -H supplies.
For a description of the PSU OK LEDs, see
Cisco IE 4010 Switch Hardware Installation Guide
38
Power-supply module
PSU OK LED
Captive screw
Power-supply module
PSU OK LED
Captive screw
Power-Supply Module LEDs, on page
Power Supply Installation
10.