Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)
Figure 9: Inserting the Rubber Plug
1
2
3
1. Identify your bracket mounting position. See
2. Insert the rubber plugs in the appropriate holes on both sides of the switch.
3. Use a screwdriver or pen to completely push in the rubber plugs.
4. Install the brackets on both sides of the switch. See
Cisco IE 4010 Switch Hardware Installation Guide
20
Rubber plug
Switch
Screwdriver
Attaching Brackets for 19-Inch Racks, on page
Attaching Brackets for 19-Inch Racks, on page
Switch Installation
18.
18.