Safety Devices; Safety And Information Signs - Angelo Po 0S1FR7G User Manual

ENGLISH
Even though the appliance is provided with
all its safety devices, during the installation
and connection procedures it may be neces-
sary to supplement it with other safety devic-
es in accordance with applicable laws.
The position of the devices is shown in the
picture.
0S1FR7G
C
1S1FR8G
C
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING draws attention on compli-
D)
ance with the rules. "Install in compliance with
the applicable regulations and use in well ven-
tilated premises only".
WARNING draws the attention on
E)
compliance with the rules. "The Manufacturer
declines all liability in case of failure to com-
ply with the installation and commissioning
instructions".
4

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

Gas supply tap: to open and close the con-
A)
nection to the gas supply line.
Safety thermocouple: cuts off the gas supply
B)
if the fl ame extinguishes.
Safety thermostat: cuts off the gas supply in
C)
case of overheating.
A
B
E
D
C B
G
A
WARNING: watch out for hot surfaces.
F)
CE Marking: it indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
SAFETY
F
37M3202
3413901_ut_GB