Hazards And Safety Provisions During Appliance; Decommissioning - Angelo Po 0S1FR7G User Manual

ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for
the countermeasures indicated below:
► Source of hazard: electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: handling of heavy loads
Hazard
Risk of injury due
to body overload
► Source of hazard: Risk generated by materials/substances
Hazard
C o n c e n t r a t i o n
of unburned gas
emissions due to
an incorrect appli-
ance decommis-
sioning
12
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
When the appliance
moves
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qual-
ifi ed staff only, in accor-
dance with the relevant
applicable laws.
• Specialist procedure
• Turn off the power supply
before removing the cov-
ers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no
voltage
Countermeasures
• Use a suitable lifting de-
vice
• observe the limit values
for lifting and transport
• Wear personal protec-
tive equipment
Countermeasures

Decommissioning

tions must be carried out
by qualifi ed personnel
SAFETY
Safety device
• P r o t e c t i o n
panels
• S y s t e m
s w i t c h - d i s -
connector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet
(e.g. for sus-
pended loads,
overhead opera-
tions...)
Safety device
opera- None
3413901_ut_GB