Installing The Appliance; Room Ventilation - Angelo Po 0S1FR7G User Manual

Table of Contents

Available languages

HANDLING AND INSTALLATION

All installation stages must be considered right

from production of the general layout.

Before starting these stages, as well as decid-

ing the place of installation, if necessary, the

person authorised to carry out these opera-

tions must organise a "safety plan" to protect

the people directly involved, as well as ensure

strict compliance with all legal requirements,

especially those relating to mobile work-sites.

The place of installation must be provided with

all the connections needed to supply the appli-

ance and dispose of the production residues.

It must be suitably lit and must meet all legal

health and hygiene requirements to prevent

any food contamination.

If necessary, fi nd the exact position of each in-

dividual appliance or subassembly and mark

the coordinates to place them correctly (see ex-

planatory diagram).

IMPORTANT: The unit is not suitable

for built-in installation.

WARNING: Do not install the unit

next to walls made of fl ammable material.

WARNING

: Air inlets are required in

the room where the appliance is installed to

ensure a proper operation of the appliance

and to exchange the air in the room.

WARNING

: The air inlets should be

of appropriate size, protected by gratings,

and placed so that they cannot be obstruct-

ed.

3413901_inst_GB