Faults; Troubleshooting - Angelo Po 0S1FR7G User Manual

FAULTS

The appliance has been tested before com-
missioning. The information provided below
is intended to help identify and correct any
anomalies and malfunctions which might oc-
cur during use.
Some of these issues may be resolved by the
user, whereas other issues require specifi c
technical knowledge or skill, and therefore
they must be dealt with by qualifi ed staff with
recognised experience acquired in the specifi c
sector of operation.
Issues
Smell of gas
The pilot light does not
light up
The pilot light goes off .
The pilot light ignites
but the burner remains
off .
The fl ame is yellow.
The appliance does not
heat up.
3413901_ut_GB
FAULTS

TROUBLESHOOTING

Causes
Occasional leak because
fl ame has gone off .
Air in pipelines due to long
period of downtime.
The thermocouple has not
heated up enough.
Burner dirty, heat exchange
pipes clogged, condensation
drips.
Contactor not receiving pow-
er or faulty
NOTE: For any need, please contact
Angelo Po's agents or headquarters, which
can be found in the contacts section of the
website www.angelopo.com.
Turn off the gas supply tap
and ventilate the room
Make more attempts to light the
Make more attempts
to light the fl ame.
Check the condition of the ther-
mostat and activate any ignition
enabling device.
NOTE: Contact the af-
ter-sales service.
Check the condition of the ther-
mostat and activate any ignition
enabling device.
Check or replace the contactor
ENGLISH
Remedies
fl ame.
coil.
25