Chapter 59: Removing The Optical-Drive Eject-Button Board; Prerequisites; Procedure - Dell Alienware Area-51 R3 Threadripper Edition Service Manual

Removing the optical-drive eject-button board
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See
3. Remove the handle bars.
4. Remove the front bezel.
Procedure
1. Disconnect the optical-drive eject-button board cable from the I/O board.
a. optical-drive eject-button board cable
b. securing clip
c. I/O board
2. Open the securing clips which secure the optical-drive eject-button board cable to the chassis.
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
After working inside your
99