Table of Contents
Advertisement
Replacing the front-bezel heat-sensor cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Route the front-bezel heat-sensor cable through the bracket.
2. Align the tab on the front-bezel heat-sensor cable on the chassis.
3. Push the release tab on the front-bezel heat-sensor cable and press it into place.
Post-requisites
1. Replace the
PCI
fan.
2. Replace the left and right side-panels. See
3. Replace the
stability
foot.
computer. After working inside your computer, follow the instructions in
"Replacing the side
panels".
After working inside your
75
Advertisement
Table of Contents
Need help?
Do you have a question about the Alienware Area-51 R3 Threadripper Edition and is the answer not in the manual?
Questions and answers