Dell Alienware Area-51 R3 Threadripper Edition Service Manual page 126

Table 4. System setup options—Advanced menu (continued)
Advanced
Numlock Key
Table 5. System setup options—OC menu
OC
AMD CPU
AMD Memory
Table 6. System setup options—Security menu
Security
Unlock Setup
Admin Password
System Password
HDD Password Status
HDD1 Password Status
HDD2 Password Status
HDD3 Password Status
Password Change
Computrace
HDD protection
Firmware TPM
UEFI Firmware Capsule Updates
126
if the Auto On Time is set to Everyday, Weekdays, or Selected
Days.
Default: Disabled.
Enable or disable Numlock.
Default: Enable Numlock.
Allows you to set OC mode and Custom Pstate0 for the
CPU.
Allows you to set the overclocking and adjust MEM VDDIO,
Displays if the setup status is unlocked.
Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
Allows you to set the system password. The system password
controls access to the computer at boot.
Displays if the HDD password is clear or set.
Default: Not set.
Displays if the HDD password is clear or set.
Default: Not set.
Displays if the HDD password is clear or set.
Default: Not set.
Displays if the HDD password is clear or set.
Default: Not set.
Allows you to permit or deny system password or HDD
password changes. Default: Permitted
Enable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
Allows you to set, change, or delete the hard-disk drive
password.
Default: Disabled.
Enable or disable the firmware TPM.
Default: Enabled.
Enable or disable BIOS updates through UEFI capsule
update packages.
Default: Enabled.