Fujitsu F2MC-16L Hardware Manual page 39

I Connecting (using a probe cable) to the user system
CAUTION
Prohibition
With a probe cable compatible with the package of the regular-production MCU being used,
connect the cable to the appropriate connector of the user system, as shown in Figure 2.3-1
"Connecting (using a probe cable) to the user system".
For more information on how to connect the connector of the probe cable header, see the
operation manual of the probe cable used.
Figure 2.3-1 Connecting (using a probe cable) to the user system
Make sure that power to the product is turned off and the power plug is
disconnected from outlets before connecting or disconnecting cables.
Doing so may result in device problems or electric shock.
Do not grasp the cable when unplugging the power plug and cable.
Always grasp the power plug or connector itself. Pulling the cable may
expose conductors or sever wires in it, possibly resulting in device
problems, fire, or electric shock.
Probe cable
Get other manuals https://www.bkmanuals.com
2.3 Connecting the User System
User system
25