Connecting The User System - Fujitsu F2MC-16L Hardware Manual

CHAPTER 2 CONNECTING THE EMULATOR
2.3

Connecting the User System

Connect a probe to the user system.
I Connecting the user system
Connect a probe to the user system.
The method of connecting a probe to the user system depends on the probe configuration.
Table 2.3-1 "Probe configurations" summarizes the applicable probe configurations.
Table 2.3-1 Probe configurations
Cable used
Probe cable
Flat cable
*1: The shape of the header connector depends on the model of header.
Example: IC socket and NQPACK connector
Note:
Before connecting the adapter board to the user system using a probe, remove the regular-
production MCU from the user system.
24
Probe configuration
Probe cable Insert the connector
into the appropriate connector
system.
Flat cable and probe Insert the connector
header appropriate connector
Flat cable Connect the connector of the flat cable to the
connector of the user system.
Get other manuals https://www.bkmanuals.com
Connection to user system
(*1)
of the probe cable header
(*1)
of the user
(*1)
of the probe header into the
(*1)
of the user system.