System Configuration - Fujitsu F2MC-16L Hardware Manual

CHAPTER 2 CONNECTING THE EMULATOR
2.1

System Configuration

The emulator is designed to be connected to and controlled by a host machine. The
host machine uses emulator debugger software to control the emulator. See the
Softune Workbench Operation Manual for information on how to use the software.
I System configuration
Figure 2.1-1 "System configuration" shows the emulator system configuration.
Host machine
22
Figure 2.1-1 System configuration
Emulator system
Emulator
(3)
Emulator unit
Test equipment
(e.g., logic analyzer)
(*1)
(1) Adapter board
(2) Probe
(*1)
Probe cable , flat cable, or flat cable + probe header
(*1)
(3) RS-232C cable , USB cable
(*1)
(4) BNC cable
*1: To be prepared separately
Get other manuals https://www.bkmanuals.com
(1) (2)
(4)
(*1)
(*1) (*1)
, or LAN cable
User system