4 System Configuration
4.1. Using the adapter as an emulator system
Connect the adapter between the host computer and the user system so that the adapter can serve
as an emulator under control of the host computer. For using emulator debugger software on the
host computer, refer to the "SOFTUNE Workbench OPERATION MANUAL".
Figure 4.1.1 shows the system configuration when the adapter is used as an emulator system.
Host
computer
*1:
USB cable
*2:
IDC10 cable (flat cable of the adapter)
BGM Adaptor MB2146-08-E Operation Manual V1.1
Chapter 4 System Configuration
Adaptor
*1
*2
Figure 4.1.1 System configuration (emulator system)
MCU-UM-500001-E-11 – Page
User
Adaptor
interface
interface
connector
connector
User system
4
MCU