Bahco TAWM1412M Original Instructions Manual page 4

TAWM SERIES
SPECIFICATIONS
HEAD TYPE
Square drive 48 teeth
9x12, 14x18 & 24x32 receivers for interchange-
able head
DISPLAY
• DISPLAY TYPE:
Dot Matrix LCD (192 x 65 Resolution) STD
Dot Matrix LCD (168 x 48 Resolution) SLIM
• VIEWING DIRECTION: 6:00
• BACKLIGHT: WHITE (LED)
SEALED BUTTON PAD
POWER - ON/OFF and torque and angle
re-zero
ENTER - measurement mode select and
menu entry
UP – increments torque and angle settings
and menu navigation
DOWN - decrements torque and angle set-
tings and menu navigation
UNITS - units select: ft-lbs, in-lbs, in-oz
(depending on range); kgm, kg-cm, dNm,
cNm (depending on range) and enter PSET
(preset) menu
LCD BACKLIGHT – Illuminates all screens
and last peak torque or angle recall
FUNCTIONS
• Set - torque or angle target
• Track - real time display of torque or accumu-
lated angular rotation with progress lights
• Peak Hold - 5 sec. flashing of peak torque or
alternating peak torque/angle on release of
torque
• Peak Recall - display last peak torque or peak
torque/angle on button press
• Memory - display of last 1500 peak torque or
peak torque/angle readings
ACCURACY
• Temperature: 22°C (72°F)
• Angle: ±1% of reading ±1º angular velocity
> 10º/sec < 180º/sec
STD CW CCW
±2% ±3% of reading, 20% to
Torque: ±4% ±6% of reading, 10% to
(unflexed)
±8% ±10% of reading, 5% to 9%
SLIM CW CCW
±2% ±3% of reading, 20% to
Torque:
(unflexed)
±4% ±6% of reading, 5% to
OPERATING TEMPERATURE
0°F - 130°F (-18°C - 54°C)
STORAGE TEMPERATURE
0°F to 130°F (-18°C to 54°C)
MEASUREMENT DRIFT
ANGLE: -0.12 Angular Degrees per Degree C
TORQUE: +0.01% of reading per Degree C
HUMIDITY
Up to 90% non-condensing
BATTERY
SLIM: Single "AA" Alkaline Cell
STD: Three "AA" Alkaline Cells
Alkaline or rechargeable NiMH batteries ex-
ceeds ASME battery life requirement of 10 hours
continuous operation.
DEFAULT AUTO SHUT-OFF
After 2 minutes idle –
(Adjustable, see Advanced Settings)
100%
of full scale
19%
of full scale
of full scale
100%
of full scale
19%
of full scale