Bahco TAWM1412M Original Instructions Manual page 20

TAWM SERIES
SLIM
Note: All user configurable settings are stored in non-volatile memory and are retained while
power is off.
SHOW INFO
Show Info menu selection displays wrench operational information.
1. From Settings menu, press ENTER button while SHOW INFO selection is highlighted.
2. SHOW INFO screen is displayed.
3. UP/DOWN buttons are used to scroll screen.
Operational Information:
SN: Serial number assigned to wrench.
CAL: Date of last wrench calibration.
ISD: In-Service Date.
TCF: Torque Calibration Factor.
ACF: Angle Calibration Factor.
VER: Software version.
OVR CNT: Overtorque Counter tracks how many times an over-torque event occurred on wrench
(torque >125% of full scale).
TQZ: Torque Zero Offset.
AZZ: Angle Z-Axis Zero Offset (only on SLIM wrenches).
AZX: Angle X-axis Zero Offset (only on SLIM wrenches).
AZO: Angle Zero Offset at full scale torque (only on SLIM wrenches).
TFS: Torque full scale value (only on SLIM wrenches).
AZO+: Angle Zero Offset at CW Torque Full Scale (only on STD wrenches).
AZO-: Angle Zero Offset at CCW Torque Full Scale (only on STD wrenches).
TFS+: CW Torque Full Scale (only on STD wrenches).
TFS-: CCW Torque Full Scale (only on STD wrenches).
Copyright.
4. Pressing ENTER button exits Show Info screen and returns to Settings menu.
STD SLIM