Bahco TAWM1412M Original Instructions Manual page 30

TAWM SERIES
SLIM
Note: If LOCK is selected without a Preset configured, following screen is displayed:
STD
Note: When Preset Lock is enabled, Clear Memory function is disabled and displays following
Locked message if attempted:
STD
Note: When Preset Lock is enabled, Clear Cycle count function is disabled and displays Locked
message if attempted.
PRESET UNLOCK
When Preset Lock is enabled, a password is required to access Configure menu. Refer to Calibration
Manual for Configure password.
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight CONFIGURE menu selection using UP/DOWN buttons.
3. Press ENTER button to display Password screen.
4. Follow password entry procedure found in Calibration manual.
STD
SLIM
SLIM