Port Management; Port Configuration - Planet ISW-504PS User Manual

4.4 Port Management

In this chapter, there are three sub-functions can be configure and monitor about network interfaces:

Port Configuration

Port Status
Port Security
4.4.1 Port Configuration
This section introduces detail settings of per port of Industrial PoE Switch as shown in
the Port Setup objects of Industrial PoE Switch.
The page includes the following configurable data:
Object
Port
Link
Mode
Ingress Rate Limit
Figure 4-24 Port Setup Web Page screen
Indicate port 1 to port 5.
Display the current Port link status.
Allow configuration the port speed and operation mode. Draw the menu bar to
select the mode
• Auto Speed - Setup Auto negotiation
• 10 Half
- Force sets 10Mbps/Half-Duplex mode
• 10 Full
- Force sets 10Mbps/Full-Duplex mode
• 100 Half
- Force sets 100Mbps/Half-Duplex mode
• 100 Full
- Force sets 100Mbps/Full-Duplex mode
• Disable
- Shutdown the port manually
Default: Auto Speed
The value of inbound traffic limitation in kilobit-per-second (kbps).
Default : No Limit
-44 -
Figure 4-24 and
Description
User's Manual
Table 4-8 describes