Menus - Danfoss DHP-AL User Manual

Message
SENSOR
HEATPUMP
START
HEATPUMP+
ADD.HEAT
START --MIN
ADD. HEAT
DEFROST
3 .2

Menus

3 .2 .1 Main menu INFORMATION
The control computer's main menu, INFORMATION, is opened by pressing the right or left
button once.
Return
Cursor
Figure 12: The main menu INFORMATION for DHP-AL with sub menus .
Use the up and down buttons to select the desired sub-menu and open the menu by
pressing the right button once. To go back to the display's starting point, press the left
button once.
Danfoss – 18
Meaning
Alarm that indicates a faulty sensor.
Indicates that the compressor will start within 30 seconds. The brine
pump has started.
Indicates that heat production is active with both compressor and
auxiliary heater.
Indicates that there is a heating production demand and will start in the
specified number of minutes.
Indicates that there is an auxiliary heater demand.
Indicates the temperature for defrost.
INFORMATION
OPERATION ---
HEATCURVE
TEMPERATURE
OPERAT.TIME
DEFROST
VUBMF102
Sub-menus