Led Status Setting - Htek UC9 Series User Manual

Table of Contents

Advertisement

2. Select Yes or No for SIP Date Override Time.
3. Click
to save the configuration.
To change the Account via Web interface
1. Setting→ Date & Time→ Account.
2. Select Yes for SIP Date Override Time and select desired Account.
3. Click
to save the configuration.
To change the Daylight Saving Time via Web interface
1. Setting→ Date &Time→ Daylight Saving Time
2. Select Disable or Enable or Auto for Daylight Saving Time.
3. Click
to save the configuration.
Note:
If the IP Phone cannot obtain the time and date from the Simple Network Time
Protocol (SNTP) server, please contact your system administrator for more
information.
Daylight Saving Time
Daylight Saving Time (DST) is the practice of temporary advancing clocks during the summertime so
that evenings have more daylight and mornings have less. Typically, clocks are adjusted forward one
hour at the start of spring and backward in autumn. Many countries have used the DST at various times,
details vary by location. The DST can be adjusted automatically from the time zone configuration.
Typically, there is no need to change this setting.

LED Status Setting

The LED Status setting mainly defines the power indicator LED.
To configure LED Status via Web interface:
1. Click Setting→ Preference
2. Select Yes or No for Power Status, Ringing Status, Miss Calls Status,Voice Message Status and
Active Call Status.
3. (optional)Select LED Flash speed and LED Light color.
4. Click
for the setting.
For the LED status description, see LED Instruction
Power Indicator LED
143

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UC9 Series and is the answer not in the manual?

Table of Contents