WAN Port Status:
The device checks itself and displays network information
LAN Port Status:
The device checks itself and displays network information
Ping:
The default detection is 8.8.8.8.
Press back and you can enter the IP address
TraceRoute:
The default detection is 8.8.8.8
Press back and you can enter the IP address
USB Diagnostic:
1.
The device automatically checks the USB port status
2.
Insert the USB as prompted
3.
The device will further check whether the function is normal.
Diagnostics
With diagnostics function, you can troubleshoot network connectivity problems. Here you can use both
Ping and Traceroute functions. You can enable the phone to detect the reachability of the connected
wired or wireless network.
Ping
Ping is used to determine whether the local host can successfully exchange (send and receive) data
packets with another host. Based on the returned information, it can be inferred whether the TCP/IP
parameters are set correctly, whether the operation is normal, whether the network is smooth, etc.
How to use Ping function:
Press soft key Menu→Features
1.
62
Need help?
Do you have a question about the UC9 Series and is the answer not in the manual?