Htek UC912 Quick Reference

Steady green when power on, blinking green when the call is ringing. Blinking red
when there are new messages.
During the conversation, or plan to dial a call.
The call is ringing.
Idle interface.
Pick up the handset; enter the number, then press the send soft key or press
Press or the line keys; enter the number, then press the send soft key or press
Press ; enter the number, then press the send soft key or press
Hang up the handset or press the cancel soft key.
Press , or press the cancel soft key.
Press the cancel soft key.
Pick up the handset.
Press .
Press .
Press
Press
Press
1) Press
2) Enter the number that Transfers to.
3) Press
1) Press
2) Enter the number that Transfer to and press the send soft key or
3) Start the second conversation, press
1) Press
2) Enter the number Transfer to, and then press
3) Press
Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:
1) A press Conference soft key, the call is placed on hold.
2) A enter the number of C and then press send soft key or
3) A press the conference soft key, then A, B and C are now in a conference.
4) If add D&E, press Line 3, current conference is on hold, dial D, D answer the call. Press line 4
and dial E, E answer the call. A press conference soft key, then they are all in conference.
.
.
.
Press
Press
to redial the last call that dialed.
or press the hold soft key during a call to hold the call.
or resume soft key to resume the call.
or Transfer soft key during the conversation, the call is on hold now.
or the B Transfer soft key and now the blind Transfer completed.
or Transfer soft key during the conversation, the call is on hold now.
or Transfer soft key, then Transfer completed.
or Transfer soft key during the conversation, the call is on hold now.
, then you can hear the ring tone.
or the Tran soft key or hang up and now the Semi-attended Transfer completed.
to mute the microphone during the call.
again to un-mute the conversation.
.
, C answers the call.