System Settings; Factory Reset; Pcap Feature - Htek UC9 Series User Manual

Note: The As Bridge mode is selected by default, and the "Connect to Expansion
Module" mode is only required when the phone is connected to the expansion
module.

System settings

Factory Reset

To set Factory Reset via Phone interface
1. Press Menu→ Settings→ Advanced Setting (default password: admin)→ Phone Setting→ Factory
Reset
2. Press OK soft key in the warning page.
To set Factory Reset via Web interface
1. Click Management→ Upgrade
2. Click and then confirm the setting.

Pcap Feature

To use Pcap feature via Web interface:
1. Click Management→ Tools
2. Click and then operation the phone
3. When finishing the operation, click and then click .
4. Then you'll get the Pcap captures.
162