Table 1 Main Characteristics Of The Pmp 450M Series Ap - Cambium Networks PMP 450 AP Planning And Installation Manual

Chapter 1: Product description
• 5 GHz ports - Gigabit copper/power port combined, 100BaseT port with power out and SFP port,
2.5G Copper SFP.
• 3 GHz ports - Gigabit copper Ethernet port without Power, Ethernet, 100/1000BaseT Auxiliary with
power out, SFP1, SFP2.
• 45 bps/Hz spectral efficiency in a single sector and 90 bps/Hz in a back-to-back frequency reuse
deployment.
Table 1 gives a summary of the main PMP 450m Series AP characteristics.

Table 1 Main characteristics of the PMP 450m Series AP

Characteristic
Topology
Wireless link condition
Range
Duplexing
Connectivity
Operating frequencies
Tx EIRP
Channel bandwidth
High spectral efficiency
Timing synchronization
Data rate
Frequency bands
The PMP 450m Series AP operates from
•
5150 to 5925 MHz.
• 3300 to 3900 MHz
Hardware components
The ODU (Outdoor unit) is a self-contained transceiver unit that houses both radio and networking
electronics.
The PMP 450m Series is supplied in the following configurations:
This is achieved in an ABAB frequency reuse AP deployment model.
1
Value
PMP
LOS, near LOS or non-LOS
PMP: Up to 40 mi (or 64 km)
TDD (symmetric and asymmetric)
1000Base-T Ethernet Main port with PoE input
5.150 to 5.925 GHz
3.3 to 3.9 GHz
5 GHz - 48 dBm
3 GHz - 52 dBm
5, 7, 10, 15, 20, 30, and 40 MHz
90 bps/Hz
1
CMM5 or UGPSPTP
Up to 900 Mbps with 20 MHz channel bandwidth and up to 1.4
Gbps in a 40 MHz channel. Additional data rate improvements
are available by using 5 ms frame size.
1-3
Page
Overview of the 450 Platform Family