Radio Frequency Planning; Regulatory Limits; Conforming To The Limits; Available Spectrum - Cambium Networks PMP 450 AP Planning And Installation Manual

Hide thumbs Also See for PMP 450 AP:
Table of Contents

Advertisement

Chapter 3: System planning
Note
Contact the applicable radio regulator to find out if registration of the PMP/PTP 450
Platform link is required.

Radio Frequency planning

This section describes how to plan 450 Platform Family links to conform to analysis of spectrum and the
regulatory restrictions that apply in the country of operation.

Regulatory limits

Many countries impose EIRP limits (Allowed EIRP) on products operating in the bands used by the 450
Platform Family.
Refer to Equipment Disposal in Configuratgion Guide to determine what the maximum transmitted
power and EIRP for PMP/PTP 450 Platform that can be used in each of countries and frequency band.
Caution
It is the responsibility of the user to ensure that the PMP/PTP ODU is operated in
accordance with local regulatory limits.

Conforming to the limits

Ensure the link is configured to conform to local regulatory requirements by configuring the PMP
450/450i Series AP or PTP 450/450i Series BHM for the correct country. In the following situations, this
does not prevent operation outside the regulations:
When using connectorized ODUs with external antennas, the regulations may require the maximum
transmit power to be reduced.

Available spectrum

The available spectrum for operation depends on the regulatory band. When configured appropriately,
the unit will only allow operation on those channels which are permitted by the regulations.
3-17
Page
Radio Frequency planning

Advertisement

Table of Contents
loading

Table of Contents