Toro 34225 Operator's Manual page 6

1. Read the Operator's Manual before servicing the machine
or performing maintenance.
2. Grease the steering pivots every 100 hours.
3. Check the hydraulic fluid level every 50 hours.
1. Hour meter
2. Engine—off
3. Engine—on
4. Engine—start
5. Deflector—pull knob up to open
6. Deflector—push knob down to close
7. Spreader pattern control—rotate counterclockwise to unlock;
rotate clockwise to lock.
8. Spread pattern control—pull handle up if heavy on left side
9. Spread pattern control—push handle down if heavy on right
side
10. Throttle—fast
11. Continuous-variable setting
12. Throttle-slow
13. Spray-pressure control
126-5186
4. For more information on servicing the rear axle shafts, read
the Operator's Manual.
5. Check the tire pressure—90kPa (13 psi) every 50 hours.
6. Read the Operator's Manual.
126-9655
14. Spray pressure—decrease
15. Spray pressure—increase
16. Spray-wand-pressure control
17. Spray-wand-pressure control—off
18. Spray-wand-pressure control—decrease
19. Spray-wand pressure control—increase
20. Spray-wand pressure control—on
21. Granular-spinner lever—narrow distribution-on
22. Granular-spinner lever—narrow distribution-off
23. Granular-spinner knob—narrow distribution-decrease
24. Granular-spinner knob—narrow distribution-increase
25. Granular-spinner lever—wide distribution-off
26. Granular-spinner lever—wide distribution-on
6
decal126-5186
decal126-9655