Table of Contents
Advertisement
4.
Raise the operator platform.
5.
Back the machine up the ramp
1. Back the machine up the
ramp.
6.
Secure the machine; refer to
Machine for Transport (page
Securing the Machine for
Transport
Note:
Refer to the chemical-warning-product
label(s) before transporting the machine and follow
all local/state/federal requirements for transporting
chemicals.
Note:
Ensure that the spreader-hopper cover and the
spray wand are secure before transporting.
1.
At the left side of the machine, ensure that the
shutoff valve for the sprayer tank is closed and
the drain plug is secure. At the right side of the
machine, ensure that the pump-shutoff valve is
closed.
2.
Shut off the engine, remove the key, and engage
the parking brake.
3.
Close the fuel valve and block the tires.
4.
Use the tie-down points on the machine to
securely bind the machine to the trailer or truck
with straps, chains, cable, or ropes
Refer to local regulations for trailer and tie-down
requirements.
1. Front tie-down points
(Figure
Figure 56
2. Walk the machine forward
down the ramp.
Securing the
48).
(Figure
Figure 57
2. Rear tie-down points
56).
g031405
57).
g033507
48
Advertisement
Table of Contents
