Main Menu Options; Auto; Built-In Programs - SHOWTEC LED Octostrip Set MKII V1 Manual

LED Octostrip Set MKII

Main Menu Options

1. Auto

With this menu, you can set Auto mode.
01) Press the MODE button until the display shows
02) The device will now run all built-in programs in sequence.

2. Built-in programs

With this menu, you can set the built-in programs.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to choose the desired built-in program. The adjustment range is between
04) Press the UP/DOWN buttons until the display shows
05) Press the SETUP button to enter and to toggle between the 2 options below. Once you have chosen
the desired option, do as follows:
06) Once you have adjusted the settings, press the SETUP button to confirm.
07) Return to step 4 and choose one of the programs from the range:
Ordercode: 42232
Auto
Built-in programs
Master/Slave
DMX-512
Network settings
Sound-controlled
Static Colors
Settings
Sotware Information
.
Color (Press the UP/DOWN buttons to choose one of the 39 color presets.)
Strobe (Press the UP/DOWN buttons to set strobe frequency. The adjustment
range is between 0-99, from OFF to high frequency.)
.
.
18
.