Extended Heating Operation - Heat Mode - Comfort Funktions - RIKA PICO Operating Manual

Extended heating operation ‑ HEAT MODE ‑ comfort funktions
In addition to the basic functions of simple heating operation, the RIKA pellet stove provides extra comfort functions. However, before you can use the comfort
functions such as frost protection and child safety device, or the optional functions such as an external room thermostat or regulation of the stove via mobile phone,
you have to change from simple heating to comfort mode.
display panel
respective operating status
key display
EASY OFF
MENU
HEAT OFF
MENU
MODE
HEAT
AUTO
ROOM
Switch between EASY and HEAT modes
display of
press menu key for at least 5 seconds
EASY
O FF
IGNIT
START
EASY
50
change heat output by
pressing the „+" or „-" key
(change in 5 % increments)
Standard display for stove switched off in simple heating mode.
Pressing for at least 5 seconds changes to HEAT mode. The change is also shown in the display as confirmation.
Standard display for stove switched off in extended heating mode. (comfort functions can now be selected)
Pressing once changes to display MODE
You can select one of three possible stove comfort functions. (the menu item Mode is only active in connection with the RIKA
room sensor or the RIKA wireless room sensor active).
Pressing once takes you to the comfort function selection and you can change between the individual comfort functions using
keys and .
Pressing again confirms the comfort function currently visible HEAT, AUTO or ROOM.
HEAT
MENU
O FF
MENU
IGNIT
START
HEAT
50
change heat output by
pressing the „+" or „-" key
(change in 5 % increments)
description
comfort functions
menu item mode only active
in connection with the RIKA room sensor
or the RIKA wireless room sensor
MODE
MENU
HEAT
AUTO
ROOM
selection of comfort function
required HEAT/AUTO/ROOM
by pressing the I/O key