Mounting and sensor wiring
October 2023
4. Replace the transmitter-to-sensor wiring compartment cover and tighten the screws
16
Figure 2-6: Four-wire transmitter-to-sensor wiring connections
Figure 2-7: Nine-wire transmitter-to-sensor wiring connections
Note
Connect the four drain wires in the nine-wire cable to the ground screw located
inside the junction box.
to 14 in lbf (1.58 N m) to 15 in lbf (1.69 N m).
Installation Manual
00825-0100-5710
Micro Motion 4700 CIO Transmitter