How To Use The Communication Function (Communication Functions Other Than Nfc) - JUKI LK-1900B Series Engineer's Manual

(6) How to use the communication function (Communication functions other
than NFC)
This sewing machine is capable of inputting/outputting data by means of an USB thumb drive.
Data name
Vector form data
Memory switch data *
All sewing machine data *
Panel program data *
Main program data *
Servo program data *
XXX : No.001 to 999, which is displayed on the panel.
* It will be displayed in the case of "Service level 1". It will not be displayed in the operator level.
❻
❽
❹
❼
Display File name
VD00 XXX .VDT
LK00 XXX .MSW
LK00XXX .MSP
SP RVL(6 digits).HED
SP RVL(6 digits).P00
MA RVL(6 digits).PRG Main program data
MT RVL(6 digits).PRG Servo program data
1) Entering the communication mode
MODE key ❹ is held pressed for three sec-
onds to display the mode screen. Display "11 Com-
munication" in reverse video with ITEM SELECT key
❻ . Then, press EDIT key
2) Selecting the type of communication
Press DATA CHANGE key
type of communication.
Data that can be selected is as follows.
Data on needle entry points created with the
PM-1. The data form is commonly used among
JUKI sewing machine.
Memory switch (Level 1/Level 2) data
All data maintained by the sewing machine
Panel program data
– 66 –
❽ .
❼ to select the
Description of data