Run The Barrel Motor; Rinsing A Barrel; Manual Diagnostic Menu - Cornelius FRUITISTA 3 Service Manual

Fruitista viper 3 flavor
Table of Contents

Advertisement

Run the Barrel Motor

Rinsing a Barrel

Manual Diagnostic Menu

© 2010-2011, IMI Cornelius Inc.
Step
Action
1
Run a barrel
2
Select the barrel
3
Select Run function
4
Stop the procedure
NOTE: When RUN button is pressed, it changes to a STOP button.
When rinsing a barrel, the Barrel Maintenance menu cannot be used. The pro-
cedure must be done manually, as described in Table 24.
Step
Action
1
Empty a barrel
2
Rinse a barrel
3
Select the barrel
4
Turn off the barrel
5
Override Water Solenoid
6
Run the barrel motor
7
Complete the procedure
The Manual Diagnostic menu, shown in Figure 22, is used for troubleshooting
and testing the system on a component basis. It allows the service technician to
turn individual components of the system on and off for troubleshooting pur-
poses. Pressing the BACK button returns the display to the Main menu and
turns off all the active loads.
This screen should only be used by qualified technicians to troubleshoot
the system.
- 29 -
Table 23.
Procedure
From the Setup menu (Figure 20), open the Barrel Main-
tenance menu, shown in Figure 21.
Use the Up and Down arrows to highlight the desired
barrel
Press the SPIN button at the bottom of the display to start
the motor in the highlighted barrel
Press the STOP button at the bottom of the display to
stop the motor. Press the BACK button to return to the
Select menu.
Table 24.
Procedure
If the barrel has liquid in it, use the Purge procedure in
Table 21 to empty the barrel.
Go to the Barrel Status menu (Figure 6).
Use the Up and Down arrows to highlight the desired
barrel
Press the OFF button at the bottom of the display to turn
off the barrel.
Press the manual bypass on the water solenoid and fill
the barrel with plain water. Use the relief valve on the
faceplate of the barrel to relieve pressure and completely
fill the barrel.
Use the procedure in Table 23 to rinse the barrel.
Repeat the Purge procedure in Table 21 to empty the
barrel.
Publication Number: 621360041TBSER
Viper Service Manual

Advertisement

Table of Contents
loading

Table of Contents