Air Flow Data - Friedrich VPR VRP07K Installation & Operation Manual

Air Flow Data

Indoor CFM & External Static Pressure
Air Flow Data
Model Speed
Select
1
2
VRP07K/R*
3
4
5
* Rated to 0.1" ESP High and includes factory provided filter
VRP Configurator
All units are shipped with Speed Select 1 High as the default airflow. In higher static applications, it is necessary to increase the airflow
to a higher Speed Select setting. Using the VRP Configurator tool and associated instructions, the speed settings can be changed on
units with a firmware 3.7.0.0 or later.
Condenser CFM & External Static Pressure
VRP07 is designed to install through an exterior wall with a plenum (VPAWP1-8, VPAWP-14) and a Friedrich external louver .
If the Friedrich designed plenum and louver combinations are not used, the selections and design must be evaluated by Friedrich to ensure the
total pressure drop does not exceed the maximum allowable limits.
Condenser External Static Pressure
VRP 7000 Btu
7
Airflow Static Pressure (in. WC)
Setting
0.00 0.05
High 380 360
Low 330 305
High 380 360
Low 350 320
High 380 360
Low 365 335
High 380 360
Low 375 345
High 380 360
Low 380 360
Design
CFM
ESP ("WC)
550
0.10 0.15
340 310
285 255
340 310
300 270
340 310
310 280
340 310
320 290
340 310
340 310
Max
ESP ("WC)
0.02 0.08
0.20
280
230
280
230
280
230
280
265
280
280