Recovery Mode; Special Key Combinations - Ricoh MP C307 Field Service Manual

Recovery Mode

The recovery mode menu is as follows. Ask your manager for details on how to enter Recovery mode.
Menu
reboot system now
apply update from
sdcard
wipe data/factory
reset
wipe cache
partition
wipe free area
partition
wipe LegacyUI
area
micon update from
sdcard
•
If [Update Firmware] is set to [Prohibit] in [System Settings] of the MFP, the control panel cannot enter
the recovery mode.
•
Ask your manager for information on how to enter the recovery Mode.

Special Key Combinations

This section describes special key combinations for operations which required combinations of hardware keys on
the previous models.
Function
SSP (Super Service)
mode login
Resetting User Tools
System Reset
Reboots the Android OS.
Updates the Cheetah System firmware by specifying the folder path.
Deletes all installed applications and all settings on the Cheetah.
Deletes all data that is stored on the cache partition. Currently, Cheetah does not use the
cache partition, so nothing happens when this menu item is accessed.
Deletes all data that is stored on the free partition. Cheetah stores the version history on
the free partition. When this menu item is selected, it will then disappear.
Deletes Legacy UI.
Updates Keymicon by specifying the folder path.
Operation for previous models
Login to SP mode, and then press an SP
mode item while holding down the [#]
key.
In the User Tools screen, press a User
Tools category while holding down the
[#] key.
Available for: System Settings,
Copier/Document Server Features, and
Scanner Features.
Hold down the [*] and [#] keys
simultaneously for 10 seconds.
Resets the controller software.
Description
Operation for Smart Operation Panel
Login to SP mode, and then press an SP
mode item while holding down the EX3
key.
In the User Tools screen, press a User
Tools category while holding down the
EX3 key.
Available for: System Settings,
Copier/Document Server Features, and
Scanner Features.
Hold down the EX3 key and [#]
simultaneously for 10 seconds.
Resets the controller software of the main
3.System Maintenance
47