Figure 86
1. Fuel-sender cover
2. Phillips-head screw
3.
Remove the 2-socket connector of the
fuel-sender harness from the 2-pin connector of
the machine wire harness
Figure 87
1. 2-pin connector (machine
wire harness)
4.
Move the clamps that secure the hoses to the
fittings of the fuel sender inboard, and remove
the hoses from the fittings
g373885
3. Fuel tank
(Figure
87).
g373884
2. 2-socket connector (fuel
sender)
(Figure
88).
1. Hoses
2. Clamp
5.
Loosen the fuel-sender cap
1. Cap (fuel sender)
6.
Carefully lift the fuel sender from the tank.
Note:
Do not bend the pick-up tube, return
tube, or float arm.
50
Figure 88
3. Fitting (fuel sender)
(Figure
89).
Figure 89
g373882
g373883