1. Fuse block
4.
Assemble the control-arm cover to the control
arm, and secure the cover with the 2 latches.
Replacing the Telematic
Fuse
1.
Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2.
Unlatch and tilt seat; refer to
(page
42).
3.
Remove the cap from the in-line fuse holder
labeled 10 A F
USE
Figure 98
2. Fuse decal (inside the
control-arm cover)
41).
Tilting the Seat
T
P
(Figure
ELEMATIC
WR
1. Cap
2. Fuse
4.
Remove the fuse from the fuse holder.
5.
Insert a fuse of the same type and amperage.
g375761
6.
Assemble the cap onto the in-line fuse holder.
7.
Lower and latch the seat; refer to
Seat (page
Replacing the TEC
Controller Fuse
1.
Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2.
Open the hood; refer to
41).
3.
Locate the in-line fuse holder that is inboard of
the battery
99).
54
Figure 99
3. Fuse holder (labeled 10 A
F
T
USE
ELEMATIC
42).
Opening the Hood (page
(Figure
100).
g378242
P
)
WR
Lowering the
41).