Toro 03676 Operator's Manual page 68

Extended Chassis
Maintenance
Chassis and Engine
Service Interval: Every 2 years—Replace the
hydraulic hoses.
Every 2 years—Replace the coolant hoses.
Every 2 years—Flush and replace the coolant.
Cleaning
Washing the Machine
Wash the machine as needed using water alone
or with a mild detergent. You may use a rag when
washing the machine.
Important:
Do not use brackish or reclaimed
water to clean the machine.
Important:
Do not use power-washing equipment
to wash the machine. Power-washing equipment
may damage the electrical system, loosen
important decals, or wash away necessary grease
at friction points. Avoid excessive use of water
near the control panel, engine, and battery.
Important:
Do not wash the machine with the
engine running. Doing so may result in internal
engine damage.
68