Applying The Ce Decals - Toro 03676 Operator's Manual

6

Applying the CE Decals

Parts needed for this procedure:
1 CE decal
1 Production year decal
1 Warning decal
Applying the CE Decal
1. Use rubbing alcohol and a clean rag to clean
the area of the hood next to the hood lock, and
allow the hood to dry.
Figure 37
1. CE decal
2. Remove the backing from the CE decal.
3. Apply the decal to the hood.
Applying the Year of Production
Decal
1. Use rubbing alcohol and a clean rag to clean the
floor bracket area next to the serial plate, and
allow the bracket to dry
(Figure 37).
g375553
2. Hood lock
(Figure 38).
1. Year of production decal
2. Remove the backing from the year of production
decal.
3. Apply the decal to the floor bracket.
Applying the CE Warning Decal
1. Use rubbing alcohol and a clean rag to clean the
surface of warning decal 133-2930, and allow
the decal to dry
1. CE warning decal
2. Remove the backing from the CE warning decal.
3. Apply the CE warning decal over decal 133-293.
21
Figure 38
2. Serial plate
(Figure 39).
Figure 39
2. Warning decal 133-293
g375554
g375338