Product Overview; Specifications; Attachments/Accessories; Operation - Toro 02720 Operator's Manual

Product Overview

Specifications

Note: Specifications and design are subject to change
without notice.
Length 83.5 inches (212 cm)
Width 43.1 inches (109.5 cm)
Height 44 inches (112 cm)
Weight, 298 lb (135 kg)
cutting unit
only
Engine 3600 rpm
Speed
Rotor 3000 rpm
Speed
Number of 24
Blades

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Setting the Height of Cut

You can set the height of cut of the mower from 1/2 to
5-1/2 inches (12.7 mm to 140 mm) as follows:
1. Stop the engine and allow all moving parts to stop.
2. While facing the mower from the front, release the
turnbuckle lock (Figure 2).
1. Turnbuckle lock
4
Figure 2
2. Turnbuckle