Table of Contents
Advertisement
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1.
From the M
M
AIN
scroll down to the S
right button
(Figure
2.
In the S
ETTINGS
scroll down to the P
the right button
(Figure
3.
To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
, use the center button to
ENU
M
and press the
ETTINGS
ENU
47).
Figure 47
M
, use the center button to
ENU
M
and press
ROTECTED
ENU
48A).
Figure 48
(Figure
48B and
until the last digit is entered and press the right
button once more.
4.
Press the middle button to enter the PIN code
(Figure
48D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O
allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
g028523
change the setting in the Protected Menu. After you
set the PIN code, rotate the key switch O
to the O
position to enable and save this feature.
N
Setting the Service Due Timer
This resets the service due hours after a scheduled
maintenance procedure is performed.
1.
In the Settings Menu, use the center button to
scroll down to the P
the right button.
2.
Enter PIN; refer to Accessing Protected Menus
on the Operator's Manual for your machine.
3.
In the Service Menu, navigate to the H
M
.
ENU
4.
Scroll down to the service symbol
Note:
If service is currently due, the first icon
shows N
5.
Below the first icon is the service interval item
(time interval, e.g. 250, 500, etc.)
Note:
Service interval is a protected menu item.
6.
Highlight the service interval and press the right
button.
7.
When the new screen appears, confirm R
g028522
S
ERVICE
8.
Select Y
ES
9.
After you select Y
and reverts back to the Service Hours selections.
27
Figure
48C). Repeat this step
position locks the protected menu.
hides the protected
N
M
ROTECTED
.
OW
H
—A
Y
S
OURS
RE
OU
URE
(center button) or N
O
the interval screen clears,
ES
position and
FF
and back
FF
and press
ENU
OURS
.
ESET
?
(left button).
Advertisement
Table of Contents
