Toro 03676 Operator's Manual page 51

Cleaning the Installing the
Fuel-Pickup Tube
1. Clean the screen at the end of the fuel pick-up
tube (Figure 90).
Figure 90
2. Carefully assemble the fuel pick-up tube and
float into the fuel tank
Figure 91
1. Cap (fuel sender)
3. Align the fittings for the pick-up tube and return
tube inboard.
4. Tighten the fuel-sender cap to the fuel tank.
5. Assemble the hose onto the fittings of the fuel
sender, and secure the hoses to the fittings with
the clamps (Figure
(Figure 91).
92).
1. Hoses
2. Clamp
6. Plug the connector of the fuel-sender harness
into the connector of the machine wire harness
(Figure 93).
g373881
1. 2-pin connector (machine
wire harness)
7. Align the holes in the fuel-sender cover with the
holes in the fuel tank, and secure the cover to
the tank with the 5 Phillips-head screws
94).
g373886
51
Figure 92
3. Fitting (fuel sender)
Figure 93
2. 2-socket connector (fuel
sender)
g373882
g373884
(Figure