Sony DVCAM DSR-PDX10 Operating Instructions Manual page 59

Using special effects – Digital effect
(1) Press FN to display PAGE1 while the POWER switch is set to CAMERA.
(2) Press DIG EFFT. The screen to select a desired digital effect appears.
(3) Press a desired mode. In the STILL and LUMI. modes, the still image is stored
in memory.
(4) Press –/+ to adjust the effect.
– : To reduce the effect
+: To increase the effect
Items to be adjusted
STILL
FLASH
LUMI.
TRAIL
OLD MOVIE
(5) Press
1
FN
To return to FN
Press EXIT.
To cancel the digital effect
Press OFF to return to PAGE1.
The rate of the still image you want to superimpose on the moving
picture
The interval of frame by frame playback
The color scheme of the area in the still image which is to be
swapped with a moving picture
The vanishing time of the incidental image
No adjustment necessary
OK to return to PAGE1.
2~4
DIG
EFFT
DIG EFFT
OFF OK
OLD
MOVIE
STILL
FLASH LUMI. TRAIL
The bar appears when setting following
digital effects modes : STILL, FLASH,
LUMI., TRAIL.
DIG EFFT
OFF OK
– LUMI. +
59