Step 2 Setting The Date And Time - Sony DVCAM DSR-PDX10 Operating Instructions Manual

Step 2 Setting the date and time

Set the date and time when you use your camcorder for the first time. "CLOCK SET"
will be displayed each time that you set the POWER switch to CAMERA or MEMORY
unless you set the date and time settings.
If you do not use your camcorder for
cleared from memory (bars may appear) because the built-in rechargeable battery
installed in your camcorder will have been discharged (p. 247).
Set the year, month, day, hour and then the minute, in that order.
(1) Press MENU to display the menu settings while the POWER switch is set to
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
(7) Press MENU to make the menu settings disappear.
20
CAMERA or MEMORY.
The year changes as follows:
1995 T · · · · t 2002 T · · · · t 2079
pressing the dial.
the time signal. The clock starts to move.
about four months , the date and time may be
, then press the dial.